benikigai/plus-onePublic

Plus One

Prototype in design. Every value is a design target.

Product · Supply

Supply

Who makes each part, and where?

12: suppliers
35: BOM items with a supplier
0: regions

component distributornot chosen15 shell mouldernot chosen5 packaging makernot chosen4 EMS for the main boardnot chosen2 die-cut converternot chosen2 Espressif or an authorised distributor1 micro speaker makernot chosen1 LRA makernot chosen1 Li-ion cell makernot chosen1 magnet makernot chosen1 fastener makernot chosen1 wireless charging coil makernot chosen1

Bill-of-materials lines per supplier, most first. Not chosen: the supplier is still to be sourced.

Supplier	Region	Supplies
To be sourced: shell moulder InferredEngineering judgement, not measured. Low confidence.Evidence: `src:design-brief`not sourced yet `sup:shell-moulder`	—	Base: the interface, Pogo pad ×5, Top shell, Light-ring diffuser, Plus button
To be sourced: EMS for the main board InferredEngineering judgement, not measured. Low confidence.Evidence: `src:design-brief`not sourced yet `sup:ems`	—	Main board (PCBA), Bare board, 4 layers
Espressif or an authorised distributor InferredEngineering judgement, not measured. Low confidence.Evidence: `src:design-brief`not sourced yet `sup:module-vendor`	—	ESP32-S3 module, 16 MB flash, 8 MB PSRAM
To be sourced: component distributor InferredEngineering judgement, not measured. Low confidence.Evidence: `src:design-brief`not sourced yet `sup:chip-distributor`	—	MEMS microphone, bottom port ×2, Class-D amp with a capped output, Haptic driver, 6-axis motion sensor, Fuel gauge, Charger with power path, Wireless charging receiver, RGB LED, addressable ×12, Tactile switch under the plus, USB-C receptacle, mid-mount, BOOT button, Hardware power-off switch, Qwiic connector, Battery connector, Passives
To be sourced: micro speaker maker InferredEngineering judgement, not measured. Low confidence.Evidence: `src:design-brief`not sourced yet `sup:audio-vendor`	—	Speaker, 12 mm thin
To be sourced: LRA maker InferredEngineering judgement, not measured. Low confidence.Evidence: `src:design-brief`not sourced yet `sup:haptic-vendor`	—	Haptic motor, 7 mm coin
To be sourced: Li-ion cell maker InferredEngineering judgement, not measured. Low confidence.Evidence: `src:design-brief`not sourced yet `sup:cell-maker`	—	Li-ion cell with protection
To be sourced: die-cut converter InferredEngineering judgement, not measured. Low confidence.Evidence: `src:design-brief`not sourced yet `sup:converter`	—	Battery foam tape, Mic gasket ×2
To be sourced: magnet maker InferredEngineering judgement, not measured. Low confidence.Evidence: `src:design-brief`not sourced yet `sup:magnet-vendor`	—	Magnet ring
To be sourced: fastener maker InferredEngineering judgement, not measured. Low confidence.Evidence: `src:design-brief`not sourced yet `sup:fastener`	—	Board screw, 2 mm thread-forming for plastics ×3
To be sourced: wireless charging coil maker InferredEngineering judgement, not measured. Low confidence.Evidence: `src:design-brief`not sourced yet `sup:coil-vendor`	—	Wireless charging coil and ferrite
To be sourced: packaging maker InferredEngineering judgement, not measured. Low confidence.Evidence: `src:design-brief`not sourced yet `sup:pack`	—	Retail box, Pulp tray, USB-C cable, 0.5 m, Quick start card with the unit QR