benikigai/plus-onePublic

Plus One

Prototype in design. Every value is a design target.

Evidence · Sources

Sources

Where did each value come from?

10: sources
242: claims

Parts and 3D0%0/94 Supply0%0/12 Category detail0%0/4 Assembly0%0/66 Line0%0/28 Quality0%0/23 Sources0%0/242

Values measured or observed, out of every value the layer holds. The rest are inferred, filed or estimated.

Plus One

by N+1 LabsMaker endorsed

See the product on nplusonelabs.com

agent-deviceconsumer-electronicsbattery-poweredwirelessopen-hardware

ClaimedThe publisher's values, not yet checked

CheckedValues compared against a physical unit or the maker's own data

TestedValues compared against a real build

Units examined: 0
Revision examined: Plus One Core, generation one, concept rev B (decision 20; prototype in design, nothing built)
License: CC-BY-4.0
Lineage: Original, no base OPD
Visibility in file: Public

Observed share0%self-reported

Card completeness100%self-reported

Rebuild checkpassself-reported

Reproduction agreementnot yet measuredself-reported

Every value says where it came from and how sure it is. The chip after a value names its source; the bars are its confidence (high, medium, low). Click a chip to see the evidence behind it.

measuredMeasured across units: CT, calipers, CMM · 0
observedSeen directly: teardown, markings, photos · 0
filingFrom a public filing, such as FCC · 0
reportFrom a public report, review or repair guide · 0
inferredEngineering judgement, not measured · 242
makerConfirmed by the maker · 0

242 claims in this file: 0 high, 0 medium and 242 low confidence.

Source	Kind	Reference	SHA-256
`src:design-brief`	maker	docs/design-brief.md	`6f0dcfc631d9…` matches file
`src:cad`	maker	parts/geometry.json	`5b6ad4ee5fcc…` matches file
`src:tracker-puck-spec`	maker	nplus1labs/factory docs/prototype/spec-tracker-puck.md (the line and operation models this copies)	—
`src:firmware-research`	maker	nplus1labs/research docs/research/2026-11-firmware/synthesis.md	—
`src:ec-1-lessons`	maker	openproduct-co/opd-spec examples/ec-1.opd/issues (synthetic lessons this design takes on)	—
`src:module-datasheet`	maker	Espressif ESP32-S3-WROOM-1 datasheet (public)	—
`src:factory-engine`	maker	nplus1labs/factory at 9bc6753: engine/specs/plus_one_build.yaml and engine/examples/plus-one-demand (simulated from assumed values; uncalibrated)	—
`src:layout-study`	maker	line/layouts/README.md	`f41d3c6a6a55…` matches file
`src:decisions`	maker	nplus1labs/research docs/decisions.md: decision 24 (a MadeCell base) and decision 25 (the layout follows volume)	—
`src:dimension-direction`	maker	openproduct-co/opd-spec branch feat/plus-one-parametric-cad: examples/plus-one.opd/docs/dimension-direction-2026-11-01.md (approved exterior direction; CAD rework open)	—