benikigai/plus-onePublic

SHA-256 67c67d8a021dec05cc613a385a648dd275bd369e3905c638b97da376278121e5

tests:
- id: test:flash-verify
  station: sta:s7
  name: Firmware image flashed and verified
  measures: image hash
- id: test:unit-id
  station: sta:s7
  name: Unit ID provisioned once
  measures: eFuse read-back
- id: test:mic-sensitivity
  station: sta:s7
  name: Mic sensitivity after calibration
  measures: dBFS at 94 dB SPL, 1 kHz
  lower:
    value: -28
    unit: dBFS
    source: inferred
    confidence: low
    evidence:
    - src:design-brief
    note: proposed limit
  upper:
    value: -24
    unit: dBFS
    source: inferred
    confidence: low
    evidence:
    - src:design-brief
    note: proposed limit
- id: test:imu-bias
  station: sta:s7
  name: Motion sensor bias after calibration
  measures: accelerometer bias
  upper:
    value: 0.05
    unit: g
    source: inferred
    confidence: low
    evidence:
    - src:design-brief
    note: proposed limit
- id: test:button
  station: sta:s8
  name: Plus button actuation
  measures: switch closes, debounced
- id: test:touch-ring
  station: sta:s8
  name: Touch ring delta
  measures: touch counts on a reference finger
  lower:
    value: 30
    unit: '%'
    source: inferred
    confidence: low
    evidence:
    - src:design-brief
    note: proposed limit
- id: test:ring-leds
  station: sta:s8
  name: Light ring colours
  measures: camera colour check per LED
- id: test:haptic
  station: sta:s8
  name: Haptic drive current
  measures: mA at rated drive
  lower:
    value: 40
    unit: mA
    source: inferred
    confidence: low
    evidence:
    - src:design-brief
    note: proposed limit
  upper:
    value: 90
    unit: mA
    source: inferred
    confidence: low
    evidence:
    - src:design-brief
    note: proposed limit
- id: test:charge
  station: sta:s8
  name: Charge current over USB-C
  measures: mA from USB at 5 V
  lower:
    value: 100
    unit: mA
    source: inferred
    confidence: low
    evidence:
    - src:design-brief
    note: proposed limit
  upper:
    value: 300
    unit: mA
    source: inferred
    confidence: low
    evidence:
    - src:design-brief
    note: proposed limit
- id: test:wireless-charge
  station: sta:s8
  name: Wireless charging
  measures: charge current on a reference magnetic charger
  lower:
    value: 60
    unit: mA
    source: inferred
    confidence: low
    evidence:
    - src:design-brief
    note: proposed limit
- id: test:audio-loopback
  station: sta:s8
  name: Audio loopback
  measures: speaker to mics, level and THD
  upper:
    value: 3
    unit: '%'
    source: inferred
    confidence: low
    evidence:
    - src:design-brief
    note: proposed limit
- id: test:rf-check
  station: sta:s8
  name: Radio check
  measures: Wi-Fi and BLE RSSI against a golden radio in the shield box
  lower:
    value: -60
    unit: dBm
    source: inferred
    confidence: low
    evidence:
    - src:design-brief
    note: proposed limit
- id: test:power-off
  station: sta:s8
  name: Hardware power-off current
  measures: cell current with the switch off
  upper:
    value: 1
    unit: uA
    source: inferred
    confidence: low
    evidence:
    - src:design-brief
    note: proposed limit
- id: test:pogo-limit
  station: sta:s8
  name: Pogo pad current limit
  measures: short-circuit current at the pads
  upper:
    value: 300
    unit: mA
    source: inferred
    confidence: low
    evidence:
    - src:design-brief
    note: proposed limit
- id: test:qr-read
  station: sta:s8
  name: QR reads back
  measures: scanner read