benikigai/ec-1Public
EC-1 Wireless Controller
SHA-256 d7c953e05077eaef3e2679cebd98b51241bed87ca330c08d38b883ba7dbca9d4
| step | action | tools | notes |
|---|---|---|---|
| 1 | Remove four M2 screws from the underside | PH0 driver | none |
| 2 | Lift the top shell from the USB-C end; two snaps at the far end | plastic pick | snaps can stress-whiten |
| 3 | Lift the dome sheet; remove four face buttons and two shoulder buttons | tweezers | none |
| 4 | Unplug the battery connector, then the LRA connector | plastic spudger | battery live: keep tools plastic |
| 5 | Peel the battery from its PSA pad | isopropyl, plastic card | do not bend the cell |
| 6 | Release two PCBA snaps and lift the board with the stick attached | spudger | none |
| 7 | Desolder the stick module (6 pins) to free it from the board | iron at 350 C, wick | flux residue visible on 9 of 30 units |
7 rows.