benikigai/ec-1Public
EC-1 Wireless Controller
SHA-256 03892c9db303a5a9884bcbf4d8c05a7861a61c6c4254f4598bc514b700a7ad74
| seq | station | operation | name | type | cycle_time_s | fixture |
|---|---|---|---|---|---|---|
| 1 | sta:a1 | op:buttons-in | Seat light pipe, face buttons and shoulder buttons in top shell | place | 14 | top-shell nest |
| 2 | sta:a1 | op:dome-place | Place dome sheet over the buttons | place | 6 | dome locator pins |
| 3 | sta:a2 | op:stick-solder | Hand-solder stick module to the PCBA (6 pins) | solder | 22 | PCBA nest with stick square |
| 4 | sta:a2 | op:pcba-place | Snap PCBA into bottom shell | snap-fit | 6 | |
| 5 | sta:a3 | op:battery-adhere | Stick battery into pocket with PSA | adhesive | 10 | battery press |
| 6 | sta:a3 | op:haptic-place | Place LRA and mate its connector | connector-mate | 8 | |
| 7 | sta:a3 | op:battery-mate | Mate battery connector | connector-mate | 5 | |
| 8 | sta:a4 | op:close | Close top sub-assembly onto the core | snap-fit | 8 | closing fixture |
| 9 | sta:a4 | op:screw | Drive four M2 screws to 0.18 N·m | screw | 16 | closing fixture |
| 10 | sta:t1 | op:flash | Flash the test image, then RF test | flash | 30 | USB-C pogo fixture |
| 11 | sta:t2 | op:stick-cal | Stick centre and range calibration | ext:controller:stick-calibrate | 15 | stick robot nest |
| 12 | sta:t2 | op:functional | Buttons, IMU, haptics and LED | test | 12 | |
| 13 | sta:t3 | op:cosmetic | Cosmetic and gap check | inspect | 12 | |
| 14 | sta:t4 | op:charge | Charge current and battery check | test | 20 | 8-up rack |
| 15 | sta:p1 | op:label | Apply rating label | label | 6 | |
| 16 | sta:p1 | op:pack | Pack with tray and cable | pack | 14 |
16 rows.